Disable the sockets and the pid files from the redis config files.

configs/6379.conf

@@ -38,7 +38,7 @@ daemonize no
 
 # When running daemonized, Redis writes a pid file in /var/run/redis.pid by
 # default. You can specify a custom pid file location here.
-pidfile /var/run/redis.pid
+#pidfile /var/run/redis.pid
 
 # Accept connections on the specified port, default is 6379.
 # If port 0 is specified Redis will not listen on a TCP socket.
@@ -67,8 +67,8 @@ tcp-backlog 511
 # incoming connections. There is no default, so Redis will not listen
 # on a unix socket when not specified.
 #
-unixsocket /tmp/redis.sock
-unixsocketperm 755
+#unixsocket /tmp/redis.sock
+#unixsocketperm 755
 
 # Close the connection after a client is idle for N seconds (0 to disable)
 timeout 0
@@ -180,9 +180,9 @@ dbfilename dump.rdb
 #
 # The DB will be written inside this directory, with the filename specified
 # above using the 'dbfilename' configuration directive.
-# 
+#
 # The Append Only File will also be created inside this directory.
-# 
+#
 # Note that you must specify a directory here, not a file name.
 dir ./
 
@@ -331,7 +331,7 @@ slave-priority 100
 #
 # This should stay commented out for backward compatibility and because most
 # people do not need auth (e.g. they run their own servers).
-# 
+#
 # Warning: since Redis is pretty fast an outside user can try up to
 # 150k passwords per second against a good box. This means that you should
 # use a very strong password otherwise it will be very easy to break.
@@ -397,14 +397,14 @@ slave-priority 100
 
 # MAXMEMORY POLICY: how Redis will select what to remove when maxmemory
 # is reached. You can select among five behaviors:
-# 
+#
 # volatile-lru -> remove the key with an expire set using an LRU algorithm
 # allkeys-lru -> remove any key accordingly to the LRU algorithm
 # volatile-random -> remove a random key with an expire set
 # allkeys-random -> remove a random key, any key
 # volatile-ttl -> remove the key with the nearest expire time (minor TTL)
 # noeviction -> don't expire at all, just return an error on write operations
-# 
+#
 # Note: with any of the above policies, Redis will return an error on write
 #       operations, when there are not suitable keys for eviction.
 #
@@ -453,7 +453,7 @@ appendonly no
 appendfilename "appendonly.aof"
 
 # The fsync() call tells the Operating System to actually write data on disk
-# instead to wait for more data in the output buffer. Some OS will really flush 
+# instead to wait for more data in the output buffer. Some OS will really flush
 # data on disk, some other OS will just try to do it ASAP.
 #
 # Redis supports three different modes:
@@ -494,7 +494,7 @@ appendfsync everysec
 # the same as "appendfsync none". In practical terms, this means that it is
 # possible to lose up to 30 seconds of log in the worst scenario (with the
 # default Linux settings).
-# 
+#
 # If you have latency problems turn this to "yes". Otherwise leave it as
 # "no" that is the safest pick from the point of view of durability.
 
@@ -503,7 +503,7 @@ no-appendfsync-on-rewrite no
 # Automatic rewrite of the append only file.
 # Redis is able to automatically rewrite the log file implicitly calling
 # BGREWRITEAOF when the AOF log size grows by the specified percentage.
-# 
+#
 # This is how it works: Redis remembers the size of the AOF file after the
 # latest rewrite (if no rewrite has happened since the restart, the size of
 # the AOF at startup is used).
@@ -546,7 +546,7 @@ lua-time-limit 5000
 # but just the time needed to actually execute the command (this is the only
 # stage of command execution where the thread is blocked and can not serve
 # other requests in the meantime).
-# 
+#
 # You can configure the slow log with two parameters: one tells Redis
 # what is the execution time, in microseconds, to exceed in order for the
 # command to get logged, and the other parameter is the length of the
@@ -566,7 +566,7 @@ slowlog-max-len 128
 
 # Redis can notify Pub/Sub clients about events happening in the key space.
 # This feature is documented at http://redis.io/topics/keyspace-events
-# 
+#
 # For instance if keyspace events notification is enabled, and a client
 # performs a DEL operation on key "foo" stored in the Database 0, two
 # messages will be published via Pub/Sub:
@@ -642,7 +642,7 @@ zset-max-ziplist-value 64
 # that is rehashing, the more rehashing "steps" are performed, so if the
 # server is idle the rehashing is never complete and some more memory is used
 # by the hash table.
-# 
+#
 # The default is to use this millisecond 10 times every second in order to
 # active rehashing the main dictionaries, freeing memory when possible.
 #

configs/6380.conf

@@ -38,7 +38,7 @@ daemonize no
 
 # When running daemonized, Redis writes a pid file in /var/run/redis.pid by
 # default. You can specify a custom pid file location here.
-pidfile /var/run/redis.pid
+#pidfile /var/run/redis.pid
 
 # Accept connections on the specified port, default is 6379.
 # If port 0 is specified Redis will not listen on a TCP socket.
@@ -67,8 +67,8 @@ tcp-backlog 511
 # incoming connections. There is no default, so Redis will not listen
 # on a unix socket when not specified.
 #
-unixsocket /tmp/redis.sock
-unixsocketperm 755
+#unixsocket /tmp/redis.sock
+#unixsocketperm 755
 
 # Close the connection after a client is idle for N seconds (0 to disable)
 timeout 0
@@ -180,9 +180,9 @@ dbfilename dump2.rdb
 #
 # The DB will be written inside this directory, with the filename specified
 # above using the 'dbfilename' configuration directive.
-# 
+#
 # The Append Only File will also be created inside this directory.
-# 
+#
 # Note that you must specify a directory here, not a file name.
 dir ./
 
@@ -331,7 +331,7 @@ slave-priority 100
 #
 # This should stay commented out for backward compatibility and because most
 # people do not need auth (e.g. they run their own servers).
-# 
+#
 # Warning: since Redis is pretty fast an outside user can try up to
 # 150k passwords per second against a good box. This means that you should
 # use a very strong password otherwise it will be very easy to break.
@@ -397,14 +397,14 @@ slave-priority 100
 
 # MAXMEMORY POLICY: how Redis will select what to remove when maxmemory
 # is reached. You can select among five behaviors:
-# 
+#
 # volatile-lru -> remove the key with an expire set using an LRU algorithm
 # allkeys-lru -> remove any key accordingly to the LRU algorithm
 # volatile-random -> remove a random key with an expire set
 # allkeys-random -> remove a random key, any key
 # volatile-ttl -> remove the key with the nearest expire time (minor TTL)
 # noeviction -> don't expire at all, just return an error on write operations
-# 
+#
 # Note: with any of the above policies, Redis will return an error on write
 #       operations, when there are not suitable keys for eviction.
 #
@@ -453,7 +453,7 @@ appendonly no
 appendfilename "appendonly.aof"
 
 # The fsync() call tells the Operating System to actually write data on disk
-# instead to wait for more data in the output buffer. Some OS will really flush 
+# instead to wait for more data in the output buffer. Some OS will really flush
 # data on disk, some other OS will just try to do it ASAP.
 #
 # Redis supports three different modes:
@@ -494,7 +494,7 @@ appendfsync everysec
 # the same as "appendfsync none". In practical terms, this means that it is
 # possible to lose up to 30 seconds of log in the worst scenario (with the
 # default Linux settings).
-# 
+#
 # If you have latency problems turn this to "yes". Otherwise leave it as
 # "no" that is the safest pick from the point of view of durability.
 
@@ -503,7 +503,7 @@ no-appendfsync-on-rewrite no
 # Automatic rewrite of the append only file.
 # Redis is able to automatically rewrite the log file implicitly calling
 # BGREWRITEAOF when the AOF log size grows by the specified percentage.
-# 
+#
 # This is how it works: Redis remembers the size of the AOF file after the
 # latest rewrite (if no rewrite has happened since the restart, the size of
 # the AOF at startup is used).
@@ -546,7 +546,7 @@ lua-time-limit 5000
 # but just the time needed to actually execute the command (this is the only
 # stage of command execution where the thread is blocked and can not serve
 # other requests in the meantime).
-# 
+#
 # You can configure the slow log with two parameters: one tells Redis
 # what is the execution time, in microseconds, to exceed in order for the
 # command to get logged, and the other parameter is the length of the
@@ -566,7 +566,7 @@ slowlog-max-len 128
 
 # Redis can notify Pub/Sub clients about events happening in the key space.
 # This feature is documented at http://redis.io/topics/keyspace-events
-# 
+#
 # For instance if keyspace events notification is enabled, and a client
 # performs a DEL operation on key "foo" stored in the Database 0, two
 # messages will be published via Pub/Sub:
@@ -642,7 +642,7 @@ zset-max-ziplist-value 64
 # that is rehashing, the more rehashing "steps" are performed, so if the
 # server is idle the rehashing is never complete and some more memory is used
 # by the hash table.
-# 
+#
 # The default is to use this millisecond 10 times every second in order to
 # active rehashing the main dictionaries, freeing memory when possible.
 #

configs/6381.conf

@@ -38,7 +38,7 @@ daemonize no
 
 # When running daemonized, Redis writes a pid file in /var/run/redis.pid by
 # default. You can specify a custom pid file location here.
-pidfile /var/run/redis.pid
+#pidfile /var/run/redis.pid
 
 # Accept connections on the specified port, default is 6379.
 # If port 0 is specified Redis will not listen on a TCP socket.
@@ -67,8 +67,8 @@ tcp-backlog 511
 # incoming connections. There is no default, so Redis will not listen
 # on a unix socket when not specified.
 #
-unixsocket /tmp/redis.sock
-unixsocketperm 755
+#unixsocket /tmp/redis.sock
+#unixsocketperm 755
 
 # Close the connection after a client is idle for N seconds (0 to disable)
 timeout 0
@@ -180,9 +180,9 @@ dbfilename dump3.rdb
 #
 # The DB will be written inside this directory, with the filename specified
 # above using the 'dbfilename' configuration directive.
-# 
+#
 # The Append Only File will also be created inside this directory.
-# 
+#
 # Note that you must specify a directory here, not a file name.
 dir ./
 ################################# REPLICATION #################################
@@ -330,7 +330,7 @@ slave-priority 100
 #
 # This should stay commented out for backward compatibility and because most
 # people do not need auth (e.g. they run their own servers).
-# 
+#
 # Warning: since Redis is pretty fast an outside user can try up to
 # 150k passwords per second against a good box. This means that you should
 # use a very strong password otherwise it will be very easy to break.
@@ -396,14 +396,14 @@ slave-priority 100
 
 # MAXMEMORY POLICY: how Redis will select what to remove when maxmemory
 # is reached. You can select among five behaviors:
-# 
+#
 # volatile-lru -> remove the key with an expire set using an LRU algorithm
 # allkeys-lru -> remove any key accordingly to the LRU algorithm
 # volatile-random -> remove a random key with an expire set
 # allkeys-random -> remove a random key, any key
 # volatile-ttl -> remove the key with the nearest expire time (minor TTL)
 # noeviction -> don't expire at all, just return an error on write operations
-# 
+#
 # Note: with any of the above policies, Redis will return an error on write
 #       operations, when there are not suitable keys for eviction.
 #
@@ -452,7 +452,7 @@ appendonly no
 appendfilename "appendonly.aof"
 
 # The fsync() call tells the Operating System to actually write data on disk
-# instead to wait for more data in the output buffer. Some OS will really flush 
+# instead to wait for more data in the output buffer. Some OS will really flush
 # data on disk, some other OS will just try to do it ASAP.
 #
 # Redis supports three different modes:
@@ -493,7 +493,7 @@ appendfsync everysec
 # the same as "appendfsync none". In practical terms, this means that it is
 # possible to lose up to 30 seconds of log in the worst scenario (with the
 # default Linux settings).
-# 
+#
 # If you have latency problems turn this to "yes". Otherwise leave it as
 # "no" that is the safest pick from the point of view of durability.
 
@@ -502,7 +502,7 @@ no-appendfsync-on-rewrite no
 # Automatic rewrite of the append only file.
 # Redis is able to automatically rewrite the log file implicitly calling
 # BGREWRITEAOF when the AOF log size grows by the specified percentage.
-# 
+#
 # This is how it works: Redis remembers the size of the AOF file after the
 # latest rewrite (if no rewrite has happened since the restart, the size of
 # the AOF at startup is used).
@@ -545,7 +545,7 @@ lua-time-limit 5000
 # but just the time needed to actually execute the command (this is the only
 # stage of command execution where the thread is blocked and can not serve
 # other requests in the meantime).
-# 
+#
 # You can configure the slow log with two parameters: one tells Redis
 # what is the execution time, in microseconds, to exceed in order for the
 # command to get logged, and the other parameter is the length of the
@@ -565,7 +565,7 @@ slowlog-max-len 128
 
 # Redis can notify Pub/Sub clients about events happening in the key space.
 # This feature is documented at http://redis.io/topics/keyspace-events
-# 
+#
 # For instance if keyspace events notification is enabled, and a client
 # performs a DEL operation on key "foo" stored in the Database 0, two
 # messages will be published via Pub/Sub:
@@ -641,7 +641,7 @@ zset-max-ziplist-value 64
 # that is rehashing, the more rehashing "steps" are performed, so if the
 # server is idle the rehashing is never complete and some more memory is used
 # by the hash table.
-# 
+#
 # The default is to use this millisecond 10 times every second in order to
 # active rehashing the main dictionaries, freeing memory when possible.
 #